Quechua Camping Awning – 2 Seconds EASY – Fresh

Our designers have developed an awning that is compatible with our 2 Seconds EASY tents so that you can quickly gain storage space.Thanks to its hoop assembly and adjustable straps, you can unfold this awning for more comfort! Its FRESH technology will also allow you to make it a space protected from heat.

Awning compatibility

This awning is compatible with our 2 Seconds Easy 2 and 3-person tents (part numbers 8553541, 8513472 and 8576110).
Thanks to its adjustable straps, you can quickly deploy and adjust this awning to your 2 Seconds EASY tent for even more comfort!

Assembling and disassembling the awning

A quick and easy assembly with an adjustable hoop and straps will allow you to install this awning easily.
Set up the pole and attach the awning to the pegs on the door side of your tent.
Then attach the straps to the pegs at the back of your tent and adjust them using the labels sewn onto the straps.
Finally, you can tension the awning with 2 pegs to deploy it fully.
Dismantling is done by performing operation in reverse.

Why does greige help to reduce the environmental impact?

Greige means that the fabric is not dyed and is in its raw colour state.
As the dyeing is one of the parts that generates the most environmental impact, we chose to use this process on part of the double roof of this awning.

OUR COMMITMENT TO CONSUME LESS WATER WITH THIS PRODUCT

Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce our environmental impact, we chose to use the Dope Dyeing process in which the colour pigments are added during the production of the yarn itself. We have chosen to use this process on a part of the double roof of this awning.

Awning waterproofness

All our tents and awnings are validated in the laboratory and in the field to guarantee waterproofing.
To do this, we place the tent with the entire awning under a shower that releases 200 litres of water per hour for 3 hours.
The flysheet is in 2000mm Schmerber PU-coated polyester, the groundsheet is in 5000mm Schmerber PU-coated polyester and all the seams are taped with heat-sealed strips.

Wind resistance

We test all our tents with awnings in a wind tunnel on a turntable to expose each side. The awning, when properly erected with all the shrouds properly extended around the awning, should remain habitable in a wind speed measured at 40 km/h near the ground (Force 5).

What does my product contain?

– 1 double roof and waterproof floor mat
– 1 roll bar
– 4 pegs
– 4 guy ropes
– 1 cover

Warranty for your awning:

This camping awning has been designed for occasional outdoor use (4 weeks per year) during your camping or nature outings.
Continuous exposure to UV light over a period of several weeks can damage its textile part.
Our awnings do not fall into the category of “garden furniture” and are not designed to remain outdoors permanently.
To ensure that your awning lasts as long as possible, it is important to store it when not in use.
5-Year warranty

Don’t throw away, repair!

Our tents and awnings are used on camping trips.
Over time, they age and some parts may wear out or break.
To facilitate repairs, we keep a stock of parts (tent poles, flysheets, bedrooms, etc.) so that they can be easily replaced. Don’t throw away, repair !

Product design: our expertise

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie.
This location is a place where our teams (designers, product managers, engineers, etc.) can meet with outdoor sports enthusiasts.
A significant advantage for designing high-quality products and giving you access to all our expertise.

Where do our awnings come from?

Created in our international design centre at the foot of Mont Blanc in France, the awning is then manufactured and assembled by our suppliers in China, Vietnam and Bangladesh.
They are partners who have real expertise in the manufacture of our awnings and with whom we work closely.
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Working conditions in our production workshops

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.
By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect, personal fulfilment and environmental protection.